The Tractive X-CITE shock for the Honda VFR1200X Crosstourer is a closed, pressurised monotube rear shock built around a separated oil and gas design for consistent damping. Its architecture keeps the damping oil stable under sustained use, supporting predictable behaviour across changing conditions. This unit includes an external reservoir and is configured with rebound adjustment.

Design & features

  • Closed, pressurised monotube construction for stable damping performance
  • Separated oil and gas (no emulsion) to help reduce foaming and maintain control
  • External reservoir layout for dedicated gas volume and damping consistency
  • Coil-spring rear shock configuration

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

This shock is supplied with a factory baseline tune intended to provide a balanced starting point. Fine-tuning is done via the rebound adjuster to suit load, tyre choice, and riding conditions.

Who is this for?

  • Riders who want a serviceable, pressurised rear shock with external reservoir consistency
  • Owners looking for rebound adjustability to tune feel and stability for solo or loaded riding

Before You Install

  • Confirm model fitment for your Honda VFR1200X Crosstourer and check clearance around the reservoir location
  • Inspect linkage bearings and mounting hardware condition before installation
  • Set sag and confirm spring preload is appropriate for your typical load

Serviceability/Lifecycle

As a pressurised monotube shock with separated oil and gas, this unit is designed to be maintained and serviced over its working life. Periodic servicing helps keep damping performance consistent as oil and seals wear with use.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO12-R3505-TR
Model # 46HO12-R3505-TR
Barcode # 46HO12R3505TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 332.0
Spring Rate Standard 160 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 63.6
Fitted Spring 160-180

More From This Category