The Tractive X-CITE Shock for the BMW R 1300 GS is a closed, pressurised 46 mm rear shock built around a sealed cartridge layout to keep damping consistent and reduce aeration under demanding use. This Basic configuration focuses on a straightforward adjustment set for riders who want dependable control without added complexity. It is supplied as a complete spring-equipped unit.

Design & features

  • Closed, pressurised shock design to help maintain stable damping and oil control.
  • Sealed cartridge architecture for consistent performance over long rides.
  • Spring included as part of the assembly.

Tuning Controls

  • Rebound damping adjustment.

Base Setup (factory preset)

This shock is intended to be installed and ridden with a practical baseline tune, with rebound adjustment available to refine feel for load, road surface, and riding pace.

Who is this for?

  • BMW R 1300 GS owners wanting a quality rear shock with a simple adjustment approach.
  • Riders who prefer to fine-tune rebound without managing multiple damping circuits.

Before You Install

  • Confirm correct application for your exact BMW R 1300 GS variant and year.
  • After installation, set sag and then use the rebound adjuster to dial in control for your typical load and conditions.

Serviceability/Lifecycle

As a sealed, pressurised shock, it is designed for controlled oil and gas management and can be maintained as part of routine suspension servicing to keep performance consistent over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM24-R3566-TR
Model # 46BM24-R3566-TR
Barcode # 46BM24R3566TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -25
Shock Length Eye to Eye (mm) 382.0
Spring Rate Standard 150 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 74
Fitted Spring 150-205

More From This Category