The Tractive X-CITE shock for the Honda CRF1100L Africa Twin uses a closed, pressurised design with oil and gas separated by an internal piston for consistent damping control. The architecture is aimed at maintaining stable performance across changing temperatures and sustained rough-road use. This model includes rebound damping adjustment to fine-tune feel and chassis behaviour.

Who is this for?

  • Riders who want clearer control over rear-end behaviour via rebound adjustment
  • Adventure and touring use where consistent damping is valued over long, mixed conditions
  • Owners setting up for different loads and riding surfaces and wanting an adjustable baseline

Design & features

  • Closed, pressurised shock body
  • Internal separation piston to keep damping oil and gas apart for more consistent damping
  • Built around a serviceable design intended for ongoing maintenance rather than disposable use

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

The shock is supplied with an internal baseline tune intended as a starting point. Rebound adjustment lets you refine return speed to suit riding style, surface conditions, and load.

Before You Install

  • Confirm model fitment for your specific CRF1100L Africa Twin variant and year
  • After installation, set the rebound adjuster from the supplied baseline and make changes in small steps while test riding
  • Have sag and overall chassis balance checked after fitment, especially if your loading changes

Serviceability/Lifecycle

As a closed, pressurised shock with oil/gas separation, this unit is designed to be serviceable. Periodic maintenance helps keep damping consistent and extends service life under demanding use.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO20-R2514-TR
Model # 46HO20-R2514-TR
Barcode # 46HO20R2514TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -25
Shock Length Eye to Eye (mm) 380.0
Spring Rate Standard 85 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 91.0
Notes PDSII anti-bottoming
Fitted Spring 85-205

More From This Category