The Tractive X-PERIENCE shock for the Honda XL700V Transalp uses a closed, pressurised design with a separation piston to keep the oil and gas separated for more consistent damping. It’s built around a 46 mm shock body and includes a remote reservoir on a hose. This model includes a spring and hydraulic preload adjustment for easier setup changes without disassembly.

Design & features

  • Closed, pressurised shock design with oil/gas separation piston for stable damping behaviour
  • Remote reservoir on a hose to manage oil volume and temperature more effectively
  • Supplied with spring
  • Hydraulic preload adjuster for convenient load compensation

Tuning Controls

  • Triple adjustability: rebound damping and both compression circuits (typically separated as low- and high-speed)
  • Hydraulic preload adjustment for ride height and sag tuning under changing loads

Base Setup (factory preset)

Delivered with a baseline setting intended to suit general road and touring use. Fine-tuning is typically done after setting rider sag and load, then adjusting damping to match riding conditions and preferences.

Who is this for?

  • Honda XL700V Transalp riders who regularly change between solo and loaded riding and want easier preload changes
  • Touring and mixed-use riders looking for broad external damping adjustment range
  • Owners who prefer a pressurised, separated oil/gas shock architecture for consistent feel over longer rides

Before You Install

  • Confirm fitment for your exact Honda XL700V Transalp model and year
  • Plan mounting and routing for the hose-mounted reservoir and ensure clearance through suspension travel
  • Set sag after installation, then tune damping based on real-world riding

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO08-T6503-TR
Model # 46HO08-T6503-TR
Barcode # 46HO08T6503TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-PERIENCE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 316.0
Spring Rate Standard 140 N/mm
Type Code X-PERIENCE
Stroke Metal to Metal (mm) 62.0
Fitted Spring 140-145

You May Also Like

More From This Category