The Tractive X-TREME shock for the Honda CRF1100L Africa Twin is a closed, pressurised monotube design built around a sealed internal cartridge. This architecture helps maintain consistent damping by keeping the damping oil under pressure and reducing aeration during sustained rough-road use. It is supplied with a remote reservoir and is designed to offer broad adjustability for varied loads and terrain.

Design & features

  • Closed, pressurised monotube shock with a sealed internal cartridge for consistent damping behaviour.
  • Remote reservoir design to support stable damping control under extended use.
  • Coil spring fitted.

Tuning Controls

  • Rebound damping adjustment.
  • Compression damping adjustment.
  • Additional compression circuit adjustment (triple-adjustable configuration).

Base Setup (factory preset)

This shock is supplied with a factory baseline tune intended as a starting point. Final settings should be confirmed and adjusted to suit rider weight, typical load, and intended riding conditions.

Who is this for?

  • Riders who want extensive manual damping control for mixed on-road and off-road use.
  • Owners who regularly change load (luggage/passenger) and prefer a wider tuning range.

Before You Install

  • Confirm fitment for your specific CRF1100L Africa Twin variant and year before installation.
  • After installation, check static and rider sag and then fine-tune damping to match your use.

Serviceability/Lifecycle

As a sealed, pressurised shock with a remote reservoir, routine servicing helps maintain performance over time. Service intervals and procedures should be set based on use severity and riding conditions.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO20-T5514-TR
Model # 46HO20-T5514-TR
Barcode # 46HO20T5514TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -25
Shock Length Eye to Eye (mm) 380.0
Spring Rate Standard 85 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 91.0
Notes PDSII anti-bottoming
Fitted Spring 85-205

More From This Category