The Tractive X-CITE shock for the Moto Guzzi Stelvio is a closed, pressurised monotube design that keeps the oil and gas separated for consistent damping. It uses a sealed cartridge-style architecture to reduce cavitation and maintain stable performance over long rides and mixed conditions. This model includes an external reservoir and is configured with rebound adjustment.

Design & features

  • Closed, pressurised shock with oil/gas separation for consistent damping behaviour
  • External reservoir to support oil volume and thermal stability
  • Sealed internal damping unit designed for long-term reliability

Tuning Controls

  • Rebound damping adjustment to tailor the bike’s response over bumps and during chassis transitions

Base Setup (factory preset)

Supplied with a baseline damping tune intended as a starting point for typical Stelvio road and touring use. Fine-tuning is done via the rebound adjuster to suit load, tyres and riding conditions.

Before You Install

  • Confirm shock compatibility with your exact Stelvio variant and year before fitting
  • Inspect linkage, bearings and mounting hardware condition during installation
  • After installation, set sag and then adjust rebound in small steps to match your load and pace

Serviceability/Lifecycle

As a pressurised, oil/gas-separated unit, this shock is designed to be serviceable to restore performance over time. Periodic servicing helps maintain damping consistency, especially for frequent touring or rough-road use.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46MG08-R3302-TR
Model # 46MG08-R3302-TR
Barcode # 46MG08R3302TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 335.0
Shock Length Eye to Eye (mm) 335
Spring Rate Standard 120 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 66.0
Fitted Spring 120-180

More From This Category