The Tractive X-CITE shock for the Triumph Tiger 800 XC uses a closed, pressurised damper design to keep the oil and gas separated and the damping response consistent over long rides. The shock is built around a sealed cartridge-style architecture, helping protect internal components from contamination and cavitation under demanding conditions. This model provides external rebound adjustment for fine-tuning ride feel.

Design & features

  • Closed, pressurised construction to maintain consistent damping and reduce aeration
  • Oil/gas separation via an internal piston design (not an emulsion shock)
  • Sealed cartridge-style damper layout for durability in mixed conditions

Tuning Controls

  • Rebound damping adjustment
  • No electronic adjustment indicated

Base Setup (factory preset)

The shock is supplied with a baseline setup intended to suit general road and adventure use. Rebound adjustment allows you to refine control for load changes, tyre choice, and preferred ride feel.

Who is this for?

Riders of the Tiger 800 XC who want a high-quality replacement shock with straightforward adjustability. It suits owners who prefer to tune rebound response without adding extra external compression circuits or electronics.

Before You Install

  • Confirm fitment for your exact Tiger 800 XC variant and year
  • Set sag and rebound after installation to match rider weight and typical load
  • Inspect linkage and mounting hardware condition during installation

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46TR15-R3508-TR
Model # 46TR15-R3508-TR
Barcode # 46TR15R3508TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -45
Shock Length Eye to Eye (mm) 347.0
Spring Rate Standard 110 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 67.0
Fitted Spring 110-180

More From This Category