The Tractive X-TREME shock for the Yamaha Tenere 700 World Raid is a closed, pressurised shock absorber designed to deliver consistent damping over long, mixed-surface rides. Its sealed cartridge construction helps maintain stable performance as conditions change. This unit uses external adjustment controls to tune ride feel to load and terrain.

Design & features

  • Closed, pressurised shock absorber to help reduce cavitation and keep damping more consistent
  • Sealed cartridge architecture for controlled oil flow and repeatable behaviour
  • Remote reservoir (hose-mounted) layout for improved oil/gas management and heat stability
  • Supplied as a spring-equipped unit

Tuning Controls

  • Triple external damping adjustment: rebound plus low-speed and high-speed compression

Base Setup (factory preset)

The shock is supplied with a factory baseline tune intended as a starting point. Fine-tuning is done using the external rebound and compression adjusters to suit rider preference, load, and surface conditions.

Who is this for?

  • Riders who want broad tuning range for varied terrain and changing luggage/passenger loads
  • Owners prioritising consistent damping from a pressurised, reservoir-equipped shock design

Before You Install

  • Confirm fitment for Yamaha Tenere 700 World Raid and check clearance/routing for the hose-mounted reservoir
  • Set sag and balance front/rear after installation, then adjust rebound and compression from the baseline as needed

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46YA22-T5521-TR
Model # 46YA22-T5521-TR
Barcode # 46YA22T5521TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 385.0
Spring Rate Standard 80 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 102.0
Notes PDSII anti-bottoming
Fitted Spring 80-235

You May Also Like

More From This Category