The Ohlins FKR129 FKR 100 fork cartridge kit is designed to improve front-end control and rider confidence on Ducati Panigale V4 R, V4 S and V4R models. It focuses on delivering consistent damping feel to support braking stability and clear feedback through the bars. Built as a complete cartridge unit, it suits riders chasing a more composed and communicative front end.

Ohlins | Made to race, perfected to ride

Ohlins cartridge kits are developed to deliver precise hydraulic control and predictable response. The FKR platform is aimed at riders who want repeatable behaviour across varying road and track conditions without making the fork feel harsh or vague.

Who this kit is for

  • Ducati Panigale V4 R, V4 S and V4R owners wanting improved front-end support and feel
  • Riders prioritising braking stability and mid-corner confidence
  • Spirited road riding with occasional track use

Shock design & features

  • Front fork cartridge kit (FKR 100 family)
  • Premium internal components intended for consistent performance and durability
  • Designed to deliver refined damping characteristics and improved handling consistency

Tuning controls

  • Separate compression damping adjustment
  • Separate rebound damping adjustment
  • Set up to allow straightforward fine-tuning to rider preference

Before you install

  • Confirm compatibility with your exact Panigale V4 variant listed for FKR129
  • Installation and set-up should be carried out by a qualified suspension technician
  • Record your settings during installation to simplify future tuning changes

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKR129
Model # TTX25S
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate Standard 9.5 N/mm
Type Code TTX25S
Fork Length (mm) 743.0
Stroke Metal to Metal (mm) 125.0
Product Family FKR 100
Notes For the Öhlins FL 969 fork
Fitted Spring 04744-95

More From This Category