The TracTive X-TREME rear shock for the KTM 790 ADVENTURE R is a closed, pressurised shock absorber designed to deliver consistent damping across changing temperatures and sustained use. Its sealed, oil/gas-separated construction helps reduce aeration compared with non-pressurised designs, supporting more stable control in demanding conditions. This model is configured at standard height.

Design & features

  • Closed, pressurised monotube shock architecture.
  • Oil and gas are separated by an internal floating piston to help maintain damping consistency.
  • Remote reservoir layout for oil volume management and thermal stability.
  • Supplied with a spring.

Tuning Controls

  • Triple adjustable damping, with independent tuning for compression and rebound plus an additional damping circuit for more detailed setup control.
  • Hydraulic preload adjuster for tool-free spring preload changes.

Base Setup (factory preset)

This shock is supplied with a baseline factory setting intended as a starting point. Final settings should be refined to suit rider mass, luggage/passenger load, and typical terrain.

Who is this for?

  • KTM 790 ADVENTURE R riders wanting broad adjustability for mixed on-road and off-road use.
  • Riders who regularly vary load (luggage/passenger) and want quick preload changes.
  • Owners looking for a pressurised shock design aimed at maintaining damping control during long, rough rides.

Before You Install

  • Confirm correct fitment for your exact KTM 790 ADVENTURE R variant and year.
  • Set sag and preload after installation, then fine-tune damping in small steps.
  • Check clearance around the reservoir and hose routing during full suspension travel.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46KT19-T9341-TR
Model # Active Feb 2025
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME PRO
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Type Code X-TREME

You May Also Like

More From This Category