The Tractive X-CITE rear shock for the Honda CRF1000L Africa Twin uses a closed, pressurised monotube design to keep damping consistent under load and heat. It features a separated oil and gas system to reduce aeration during long or rough rides. This model includes rebound adjustment and is built as a complete replacement unit with spring fitted.

Design & features

  • Closed, pressurised monotube architecture for stable damping performance
  • Internal separation piston to keep oil and gas apart and help prevent foaming
  • Purpose-built fitment for the Africa Twin

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

This shock is supplied with a factory baseline tune intended to suit the standard linkage and general mixed riding conditions. Fine-tuning rebound is typically used to balance comfort, control, and traction based on load and terrain.

Who is this for?

  • Riders who want a serviceable, pressurised rear shock with controlled damping for adventure and touring use
  • Owners carrying variable loads (luggage/passenger) who want rebound damping control to match conditions

Before You Install

  • Confirm your exact model and year compatibility for CRF1000L fitment before installation
  • Set sag and check spring suitability for your typical riding load
  • After installation, re-check fastener torque and clearances through full suspension travel

Serviceability/Lifecycle

This is a rebuildable shock designed to be serviced to maintain performance over time. Regular servicing intervals depend on use conditions (distance, heat, and dust/water exposure) and should be adjusted for frequent off-road riding.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO16-R2510-TR
Model # 46HO16-R2510-TR
Barcode # 46HO16R2510TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -25
Shock Length Eye to Eye (mm) 388.0
Spring Rate Standard 90 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 93.0
Notes PDSII anti-bottoming
Fitted Spring 90-205

More From This Category