The Tractive X-CITE Shock for the Honda XRV750 Africa Twin (RD07) is a pressurised rear shock built around a closed, sealed cartridge design for consistent damping under varied conditions. This model includes a spring and provides rebound adjustment. It uses an oil/gas separated layout with an internal separation piston rather than an emulsion design.

Design & features

  • Closed, pressurised sealed-cartridge construction to help maintain stable damping and reduce cavitation.
  • Oil/gas separation via an internal separation piston.
  • Spring-equipped shock assembly.

Tuning Controls

  • Rebound damping adjustment.
  • No compression or electronic adjustment indicated for this configuration.

Base Setup (factory preset)

Factory settings are not provided in the supplied product data. If you share rider load and typical use, you can confirm an appropriate baseline before fine-tuning rebound.

Who is this for?

  • Riders who want a serviceable, pressurised shock with rebound control for day-to-day road and mixed-surface use.
  • Owners looking for consistent damping behaviour from a sealed, gas-pressurised design.

Before You Install

  • Confirm fitment for Honda XRV750 Africa Twin (RD07) and check clearance around the shock body during installation.
  • Set sag and overall balance with the spring preload available on the unit (preload adjuster type not specified in the supplied data).

Serviceability/Lifecycle

This shock uses a closed, pressurised internal cartridge architecture intended for proper maintenance and rebuildability. Service intervals and procedures are not specified in the provided product data.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO93-R3102-TR
Model # 46HO93-R3102-TR
Barcode # 46HO93R3102TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 381.0
Spring Rate Standard 95 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 97.0
Fitted Spring 95-205

You May Also Like

More From This Category