The Tractive X-TREME Shock for the Honda CRF1000L Africa Twin is a closed, pressurised rear shock designed for consistent damping in varied conditions. Its internal architecture separates gas and oil to help reduce aeration and maintain predictable performance on long, rough rides. This model includes an external reservoir and retains the standard ride-height geometry unless set otherwise during installation.

Design & features

  • Closed, pressurised shock design with separated oil and gas
  • External reservoir for improved thermal stability during sustained use
  • Built to suit the Honda CRF1000L Africa Twin fitment

Tuning Controls

  • Triple-adjustable damping: rebound, compression, and high-speed compression

Who is this for?

  • Riders who want broad adjustability to tune feel for load, terrain, and riding style
  • Owners who ride long distances or rough surfaces where damping consistency matters

Before You Install

  • Confirm compatibility with your CRF1000L Africa Twin model and year before purchase
  • Set sag and damping adjustments after installation to suit rider weight and luggage/passenger use

Serviceability/Lifecycle

  • Serviceable construction intended to be maintained with periodic oil and seal replacement
  • Closed, pressurised design helps keep damping consistent between services

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO16-T5111-TR
Model # 46HO16-T5111-TR
Barcode # 46HO16T5111TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Seat Height Change (mm) Raised +15
Shock Length Eye to Eye (mm) 400.0
Spring Rate Standard 95 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 111.0
Notes PDSII anti-bottoming
Fitted Spring 95-235

You May Also Like