The Ohlins STX 36 scooter rear shock pair is built for the Honda SH 150 and designed to deliver controlled, consistent damping in real-world riding. The gas-pressurised design helps maintain damping stability during extended use and changing conditions. With external adjustment, it supports a tailored setup for rider load and road quality without compromising day-to-day comfort.

Ohlins | Made to race, perfected to ride

Developed from Ohlins suspension know-how, this STX 36 package focuses on predictable chassis behaviour and repeatable damping control. It is intended as a fit-for-purpose upgrade for a scooter platform rather than a universal shock.

Who this shock is for

  • Honda SH 150 riders wanting improved stability and damping control from the rear suspension
  • Commuters and weekend riders carrying varying loads who want adjustability to suit conditions
  • Riders chasing clearer feedback under braking and through corners

Shock design & features

This is a gas-pressurised rear shock pair from the Ohlins STX 36 Scooter family. The gas-charged architecture is intended to reduce damping fade and keep performance consistent during longer rides. The shocks use separate damping circuits to support more refined control across different riding inputs.

Tuning controls

  • Rebound damping adjustment
  • Compression damping adjustment
  • Spring preload adjustment

Before you install

  • Confirm your scooter model and fitment for a rear shock pair application
  • Set sag/preload for your typical load (solo, passenger, luggage) before fine-tuning damping
  • If you are changing tyre type or load significantly, re-check settings to match the new use

Serviceability/lifecycle

Ohlins shocks are designed to be serviced to maintain performance over time. Routine inspection and periodic servicing help preserve damping consistency and keep seals and oil in good condition, particularly if the scooter sees frequent wet-weather use.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU HO813
Model # S36PR1C1
Barcode # HO813
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.300 x 0.300 x 0.500m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Pair rear
Shock Length Eye to Eye (mm) 303.0
Spring Rate Standard 16.0 - 21.0 N/mm Progressive
Type Code S36PR1C1
Stroke Metal to Metal (mm) 75.0
Product Family STX 36 Scooter
Fitted Spring 60001-08
Rec. Ohlins Oil 01309-

More From This Category