The Ohlins YA522 is an STX 36 twin rear shock set developed for the Yamaha XJR 1200. It’s built to provide consistent damping control and predictable chassis behaviour on the road, with the adjustment range to match rider load and tyre choice. The design uses a gas-separated damping system to help maintain stability during extended, demanding riding.

Ohlins | Made to race, perfected to ride

Ohlins street shocks are engineered around stable damping characteristics and serviceable construction. This unit is designed to deliver clear feedback and controlled movement through corners and over uneven surfaces, without relying on harsh springing to feel firm.

Who this shock is for

  • XJR 1200 riders wanting more controlled rear support than a basic replacement shock
  • Riders carrying a passenger or luggage and needing proper preload and damping adjustment
  • Owners refreshing an ageing rear end while keeping a compliant, confidence-inspiring ride

Shock design & features

This is a twin rear shock configuration from the Ohlins STX 36 family. It uses a gas-separated internal layout to reduce fade and keep damping behaviour consistent as temperatures rise. The construction is intended to be maintainable and rebuildable as part of normal suspension lifecycle care.

Tuning controls

  • Spring preload adjustment to set ride height and sag for rider load
  • Rebound damping adjustment to control return speed after bumps and weight transfer
  • Compression damping adjustment to manage support under acceleration and braking inputs

Before you install

  • Confirm the motorcycle model and year compatibility for the Yamaha XJR 1200 application
  • Set sag using preload before fine-tuning damping
  • Inspect linkage/bushes and mounting hardware condition during fitment to avoid misleading handling issues

Serviceability/lifecycle

Ohlins units are designed to be serviced to maintain damping consistency over time. Periodic inspection and oil/seal maintenance will keep performance stable, especially if the bike is ridden regularly or in harsh conditions.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU YA522
Model # S36PR1C1L
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.300 x 0.300 x 0.500m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear Mono
Shock Length Eye to Eye (mm) 325.0 +10/-0
Spring Rate Standard 18.0 - 27.0 N/mm Progressive
Type Code S36PR1C1L
Stroke Metal to Metal (mm) 92.0
Product Family STX 36 Twin
Fitted Spring 00380-05

More From This Category